Stainless Steel Ferrules Specification EN 13411-3 (DIN 3093), AISI 316 Oval Ferrule
- Dawson Group Ltd. - China Manufacturer, Supplier, Factory
| Part No. | Ferrule Size(mm) | A(mm) | B(mm) | S(mm) | L(mm) |
| DS-SS0010 | 1 | 1.2 | 2.4 | 0.65 | 5 |
| DS-SS0015 | 1.5 | 1.7 | 3.4 | 0.75 | 6 |
| DS-SS0020 | 2 | 2.2 | 4.4 | 0.85 | 7 |
| DS-SS0025 | 2.5 | 2.7 | 5.4 | 1.05 | 9 |
| DS-SS0030 | 3 | 3.3 | 6.6 | 1.25 | 11 |
| DS-SS0035 | 3.5 | 3.8 | 7.6 | 1.5 | 13 |
| DS-SS0040 | 4 | 4.4 | 8.8 | 1.7 | 14 |
| DS-SS0045 | 4.5 | 4.9 | 9.8 | 1.9 | 16 |
| DS-SS0050 | 5 | 5.5 | 11 | 2.1 | 18 |
| DS-SS0060 | 6 | 6.6 | 13.2 | 2.5 | 21 |
| DS-SS0070 | 7 | 7.8 | 15.6 | 2.9 | 25 |
| DS-SS0080 | 8 | 8.8 | 17.6 | 3.3 | 28 |
| DS-SS0090 | 9 | 9.9 | 19.8 | 3.7 | 32 |
| DS-SS0100 | 10 | 10.9 | 21.8 | 4.1 | 35 |
| DS-SS0110 | 11 | 12.1 | 24.2 | 4.5 | 39 |
| DS-SS0120 | 12 | 13.2 | 26.4 | 4.9 | 42 |
| DS-SS0130 | 13 | 14.2 | 28.4 | 5.4 | 46 |
| DS-SS0140 | 14 | 15.3 | 30.6 | 5.8 | 49 |
| DS-SS0160 | 16 | 17.5 | 35 | 6.7 | 56 |
| DS-SS0180 | 18 | 19.6 | 39.2 | 7.6 | 63 |
| DS-SS0200 | 20 | 21.7 | 43.4 | 8.4 | 70 |
Stainless Steel oval ferrules are made from stainless steel . The material is AISI 316 and the ferrules are validated according to the DAWSON Text. Available in sizes from 1-20. Special sizes on request.
The ferrules are commonly used in applications within the food processing industry and also the nuclear industry. They have common uses in marine applications and they are widely used in architectural designs. Eg, balustrades and fencing.
These ferrules are normally used on stainless steel wire ropes to achieve the best possible resistance against corrosion. We do not guarantee strength of slings for lifting activities made of Stainless Steel oval ferrules. A termination performed according to our instructions will normally withstand a tensile strength of 90% of the minimum-breaking load (MBL) of the wire rope. Verifying tests must be done in order to find out the strength. Available in sizes 1-20.
Ferrules, when properly applied, are capable of holding the rated breaking strength of the rope to which they are applied. However, to determine the exact holding strength, PULL TESTING IS ESSENTIAL prior to use. This step insures the proper selection of materials, the correct swaging procedure, and an ample margin of safety for the intended use.
Products Show:
English
